Your request for information regarding asbestos products is being processed One moment please....
The word asbestos products is derived from a Greek adjective meaning inextinguishable. asbestos products is a naturally occurring mineral. It is distinguished from other minerals by the fact that its crystals
form long, thin fibers. Deposits of asbestos products are found throughout the world. The primary sites
of commercial production are: the Commonwealth of Independent States, Canada, Brazil, Zimbabwe, Russia
and South Africa.
The Greeks termed asbestos products the "miracle mineral" because of its soft and pliant properties, as
well as its ability to withstand heat. asbestos products was spun and woven into cloth in the same manner
as cotton. It was also utilized for wicks in sacred lamps. Romans likewise recognized the properties of asbestos products and it is thought that they cleaned asbestos products tablecloths by throwing them into
fire.
asbestos products became increasingly popular among manufacturers and builders in the late 19th century
due to its resistance to heat, electricity and chemical damage, sound absorption and tensile strength.
When asbestos products is used for its resistance to fire or heat, the fibers are often mixed with
cement or woven into fabric or mats. asbestos products is used in brake shoes and gaskets for its heat
resistance, and in the past was used on electric oven and hotplate wiring for its electrical insulation
at elevated temperature, and in buildings for its flame-retardant and insulating properties, tensile
strength, flexibility, and resistance to chemicals.
The inhalation of asbestos products fibers can cause serious illnesses, including mesothelioma. Since the mid
1980s, many uses of asbestos products are banned in many countries.
Types of asbestos products and associated fibres
Six minerals are defined as "asbestos" including: chrysotile, amosite, crocidolite, tremolite,
anthophyllite and actinolite.
White asbestos products
Chrysotile, CAS No. 12001-29-5, is obtained from serpentine rocks which is common throughout the world.
The rocks are called serpentine because their fibers curl; chrysotile fibers are curly as opposed to
fibers from amosite, crocidolite, tremolite, actinolite, and anthophyllite which are needlelike.
Chrysotile, along with other types of asbestos products , has been banned in dozens of countries and is
only allowed in the United States and Europe in very limited circumstances. Chrysotile is used more
than any other type and accounts for about 95% of the asbestos products found in buildings in America.
Applications where chrysotile might be used include the use of joint compound. It is more flexible than
amphibole types of asbestos products ; it can be spun and woven into fabric. Chrysotile, like all other
forms of industrial asbestos products , has produced tumors in animals. Mesotheliomas have been observed in people
who were occupationally exposed to chrysotile, family members of the occupationally exposed, and
residents who lived close to asbestos products factories and mines
Brown asbestos products
Amosite, CAS No. 12172-73-5, is a trade name for the amphiboles belonging to the Cummingtonite -
Grunerite solid solution series, commonly from Africa, named as an acronym from asbestos products Mines of
South Africa. One formula given for amosite is Fe7Si8O22(OH)2. It is found most frequently as a fire
retardant in thermal insulation products and ceiling tiles. This type of asbestos products , like all asbestos products ,
is very hazardous.
Blue asbestos products
Crocidolite, CAS No. 12001-28-4 is an amphibole from Africa and Australia. It is the fibrous form of
the amphibole riebeckite. Blue asbestos products is commonly thought of as the most dangerous type of asbestos products (see above and below). One formula given for crocidolite is Na2Fe2+3Fe3+2Si8O22(OH)2. This type of asbestos products is very hazardous.
Notes: chrysotile commonly occurs as soft friable fibers. Asbestiform amphibole may also occur as soft
friable fibers but some varieties such as amosite are commonly straighter. All forms of asbestos products are
fibrillar in that they are composed of fibers with widths less than 1 micrometre that occur in bundles
and have very long lengths. asbestos products with particularly fine fibers is also referred to as "amianthus".
Amphiboles such as tremolite have a sheetlike crystalline structure. Serpentine (chrysotile) has a
stringlike crystalline structure.[4] Tremolite often comtaminates chrysotile asbestos products , thus creating an
additional hazard.
Other asbestos products
Other regulated asbestos products minerals, such as tremolite asbestos products , CAS No. 77536-68-6, Ca2Mg5Si8O22(OH)2;
actinolite asbestos products (or smaragdite), CAS No. 77536-66-4, Ca2(Mg, Fe)5(Si8O22)(OH)2; and anthophyllite asbestos products , CAS No. 77536-67-5, (Mg, Fe)7Si8O22(OH)2; are less commonly used industrially but can still
be found in a variety of construction materials and insulation materials and have been reported in the
past to occur in a few consumer products.
Other natural and not currently regulated asbestiform minerals, such as richterite, Na(CaNa)
(Mg,Fe++)5(Si8O22)(OH)2, and winchite, (CaNa)Mg4(Al,Fe3+)(Si8O22)(OH)2, may be found as a contaminant
in products such as the vermiculite containing zonolite insulation manufactured by W.R. Grace and
Company. These minerals are thought to be no less harmful than tremolite, amosite, or crocidolite,
but since they are not regulated, they are referred to as "asbestiform" rather than asbestos products although
may still be related to diseases and hazardous.
In 1989 the United States Environmental Protection Agency (EPA) issued the asbestos products Ban and Phase Out
Rule which was subsequently overturned in the case of Corrosion Proof Fittings v. U.S. Environmental
Protection Agency, 1991. This ruling leaves many consumer products that can still legally contain trace
amounts of asbestos products . For a clarification of products which legally contain asbestos products read the EPA's
clarification statement.
asbestos products was named by the ancient Greeks who also recognized certain hazards of the material. The Greek
geographer Strabo and the Roman naturalist Pliny the Elder noted that the material damaged lungs of
slaves who wove it into cloth. Charlemagne, the first Holy Roman Emperor, is said to have had a
tablecloth made of asbestos products . Wealthy Persians, who bought asbestos products imported over the Hindu Kush,
amazed guests by cleaning the cloth simply by exposing it to fire. The Persians believed the fiber was
fur from an animal that lived in fire and died when exposed to water. Some archeologists believe that
ancients made shrouds of asbestos products , wherein they burned the bodies of their kings, in order to preserve
only their ashes, and prevent their being mixed with those of wood or other combustible materials
commonly used in funeral pyres.
Others assert that the ancients used asbestos products to make perpetual wicks for sepulchral or other lamps.
In more recent centuries, asbestos products was indeed used for this purpose. Although asbestos products causes skin to
itch upon contact, ancient literature indicates that it was prescribed for diseases of the skin, and
particularly for the itch. It is possible that they used the term asbestos products for alumen plumosum, because
the two terms have often been confused throughout history.
asbestos products became more widespread during the industrial revolution, in the 1860s it was used as insulation
in the U.S. and Canada. Development of the first commercial asbestos products mine began in 1879 in the
Appalachian foothills of Quebec. By the mid 20th century uses included fire retardant coatings,
concrete, bricks, pipes and fireplace cement, heat, fire, and acid resistant gaskets, pipe insulation,
ceiling insulation, fireproof drywall, flooring, roofing, lawn furniture, and drywall joint compound.
Approximately 100,000 people have died, or will die, from asbestos products exposure related to ship building.
In the Hampton Roads area, a shipbuilding center, mesothelioma occurrence is seven times the national
rate. Thousands of metric tons of asbestos products were used in World War II ships to wrap the pipes, line the
boilers, and cover engine and turbine parts. There were approximately 4.3 million shipyard workers
during WWII, for every thousand workers about 14 died of mesothelioma and an unknown number died from
asbestosis.
asbestos products fibers were once used in automobile brake pads and shoes. Since the mid-1990s, a majority of
brake pads, new or replacement, have been manufactured instead with Aramid fiber (Twaron or Kevlar)
linings (the same material used in bulletproof vests).
Kent, the first filtered cigarette on the market, used crocidolite asbestos products in its "Micronite" filter
from 1952 to 1956.
The first documented death related to asbestos products was in 1906. In the early 1900s researchers began to
notice a large number of early deaths and lung problems in asbestos products mining towns. The first diagnosis of
asbestosis was made in England in 1924.[8] England protected asbestos products workers about ten years sooner
than the U.S. By the 1930s, England regulated ventilation and made asbestos products an excusable work related
disease. The term Mesothelioma was not used in medical literature until 1931, and wasn't associated
with asbestos products until sometime in the 1940s.
The United States government and asbestos products industry have been criticized for not acting quickly enough
to inform the public of dangers, and to reduce public exposure. In the late 1970s court documents
proved that asbestos products industry officials knew of asbestos products dangers and tried to conceal them.
In Japan, particularly after World War II, asbestos products was used in the manufacture of ammonium sulfate for
purposes of rice production, sprayed upon the ceilings, iron skeletons, and walls of railroad cars and
buildings (during the 1960s), and used for energy efficiency reasons as well. Production of asbestos products in Japan peaked in 1974 and went through ups and downs until about 1990, when production began to
drop severely.
Serpentine group
Serpentine minerals have a sheet or layered structure. Chrysolite is the only asbestos products mineral in the
serpetine group. In the United States, chrysotile has been the most commonly used type of asbestos products .
According to the U.S. EPA asbestos products Building Inspectors Manual, chrysotile accounts for approximately
95% of asbestos products found in buildings in the United States. Chrysotile is often present in a wide variety
of materials, including :
joint compound
mud and texture coats
vinyl floor tiles, sheeting, adhesives
roofing tars, felts, siding, and shingles
"transite" panels, siding, countertops, and pipes
fireproofing
caulk
gaskets
brake pads and shoes
clutch plates
stage curtains
fire blankets
interior fire doors
fireproof clothing for firefighters
thermal pipe insulation
In the European Union and Australia it has recently been banned as a potential health hazard and is not
used at all. Japan is moving in the same direction, but more slowly. Revelations that hundreds of
workers had died in Japan over the previous few decades from diseases related to asbestos products sparked a
scandal in mid-2005. Tokyo had, in 1971, ordered companies handling asbestos products to install ventilators
and check health on a regular basis; however, the Japanese government did not ban crocidolite and
amosite until 1995, and a full-fledged ban on asbestos products was implemented in October 2004.
Amphibole group
Five types of asbestos products are found in the amphibole group: amosite, crocidolite, anthophyllite, tremolite,
and actinolite. Amosite, the second most likely type to be found in buildings, according to the U.S.
EPA Asestos Building Inspectors Guide, is the "brown" asbestos products .
Amosite and crocidolite were formally used in many products until the early 1980s. The use of all types
of asbestos products in the amphibole group was banned (in much of the Western world) by the mid-1980s, and by
Japan in 1995. These products were mainly:
Low density insulation board and ceiling tiles asbestos products -cement sheets and pipes for construction, casing for water and electrical/telecommunication
services
Thermal and chemical insulation (i.e., fire rated doors, limpet spray, lagging and gaskets)
The first signs of health related concerns associated with asbestos products fibers was likely late 1800s/early
1900s. asbestos products diseases can be seen as early as 10 years after exposure. As such, with asbestos products mining,
manufacturing and installation in full gear by the late 1800s, it is likely that asbestos products related
sickness/illness was present and diagnosed, though not named until later in 1900s.
In 1918, a Prudential Insurance Company official notes that life insurance companies will not cover asbestos products workers, because of the "health-injurious conditions of the industry".
In 1930, the major asbestos products company Johns-Manville produces a report, for internal company use only,
about medical reports of asbestos products worker fatalities. In 1932, A letter from U.S. Bureau of Mines to asbestos products manufacturer Eagle-Picher states, in relevant part, "It is now known that asbestos products dust is
one of the most dangerous dusts to which man is exposed". In 1933, Metropolitan Life Insurance Co.
doctors find that 29 percent of workers in a Johns-Manville plant have asbestosis. Likewise, in 1933,
Johns-Manville officials settle lawsuits by 11 employees with asbestosis on the condition that the
employees' lawyer agree to never again "directly or indirectly participate in the bringing of new
actions against the Corporation." In 1934, officials of two large asbestos products companies, Johns-Manville
and Raybestos-Manhattan, edit an article about the diseases of asbestos products workers written by a
Metropolitan Life Insurance Company doctor. The changes minimize the danger of asbestos products dust. In 1935,
officials of Johns-Manville and Raybestos-Manhattan instruct the editor of asbestos products magazine to publish
nothing about asbestosis. In 1936, a group of asbestos products companies agrees to sponsor research on the
health effects of asbestos products dust, but require that the companies maintain complete control over the
disclosure of the results.
In 1942, an internal Owens-Corning corporate memo refer to "medical literature on asbestosis . . . .
scores of publications in which the lung and skin hazards of asbestos products are discussed." Either in 1942 or
1943, the president of Johns-Manville, Lewis H. Brown, says that the managers of another asbestos products company were "a bunch of fools for notifying employees who had asbestosis." When one of the managers
asks, "do you mean to tell me you would let them work until they dropped dead?" The response is reported
to have been, "Yes. We save a lot of money that way." In 1944, a Metropolitan Life Insurance Company
report finds 42 cases of asbestosis among 195 asbestos products miners.
In 1951, asbestos products companies removed all references to cancer before allowing publication of research
they sponsor. In 1952, Dr. Kenneth Smith, Johns-Manville medical director, recommends (unsuccessfully)
that warning labels be attached to products containing asbestos products . Later, Smith testifies: "It was a
business decision as far as I could understand . . . the corporation is in business to provide jobs
for people and make money for stockholders and they had to take into consideration the effects of
everything they did and if the application of a caution label identifying a product as hazardous would
cut into sales, there would be serious financial implications.". In 1953, National Gypsum's safety
director writes to the Indiana Division of Industrial Hygiene, recommending that acoustic plaster
mixers wear respirators "because of the asbestos products used in the product." Another company official notes
that the letter is "full of dynamite," urges that it be retrieved before reaching its destination.
A memo in the files notes that the company "succeeded in stopping" the letter, which "will be modified."
asbestos products as a contaminant
Most respirable asbestos products fibers are invisible to the unaided human eye because their size is about
3.0-20.0 µm in length and can be as thin as 0.01 µm. Human hair ranges in size from 17 to 181 µm in
width. Fibers ultimately form because when these minerals originally cooled and crystallized, they
formed by the polymeric molecules lining up parallel with each other and forming oriented crystal
lattices. These crystals thus have three cleavage planes, just as other minerals and gemstones have.
But in their case, there are two cleavage planes that are much weaker than the third direction. When
sufficient force is applied, they tend to break along their weakest directions, resulting in a linear
fragmentation pattern and hence a fibrous form. This fracture process can keep occurring and one larger asbestos products fiber can ultimately become the source of hundreds of much thinner and smaller fibers.
As asbestos products fibers get smaller and lighter, the more easily they become airborne and human respiratory
exposures can result. Fibers will eventually settle but may be re-suspended by air currents or other
movement.
Friability of a product containing asbestos products means that it is so soft and weak in structure that it can
be broken with simple finger crushing pressure. Friable materials are of the most initial concern due
to their ease of damage. The forces or conditions of usage that come into intimate contact with most
non-friable materials containing asbestos products are substantially higher than finger pressure.
Portions of El Dorado county are known to contain natural asbestos products formations near the surface. The
USGS studied amphiboles in rock and soil in the area in response to an EPA sampling study and subsequent
criticism of the EPA study. The study found that many amphibole particles in the area meet the counting
rule criteria used by the EPA for chemical and morphological limits, but do not meet morphological
requirements for commercial-grade-asbestos. The executive summary pointed out that even particles that
do not meet requirements for commercial-grade-asbestos may be a health threat and suggested a
collaborative research effort to assess health risks associated with "Naturally Occurring asbestos products ".
asbestos products in the environment
asbestos products is in the air we breathe and some of the water we drink, including water from natural sources.[
Studies have shown that members of general (non-occupationally exposed) population have tens of
thousands to hundreds of thousands of asbestos products fibers in each gram of dry lung tissue, which translates
into millions of fibers and tens of thousands of asbestos products bodies in every person's lungs.
The EPA has proposed a concentration limit of 7 million fibers per liter of drinking water for long
fibers (lengths greater than or equal to 5 µm). The OSHA, (Occupational Safety and Health
Administration) has set limits of 100,000 fibers with lengths greater than or equal to 5 µm per cubic
meter of workplace air for 8-hour shifts and 40-hour work weeks.
asbestos products construction in developing countries
Countries like India and China have continued widespread use of asbestos products . The most common is corrugated asbestos products -cement Sheets or A/C Sheets for roofing and for side walls. Millions of homes, factories,
schools or sheds and shelters continue to use asbestos products . Eternit Everest, Hyderabad Industries and RamCo
are some of the major asbestos products products manufacturers in India.
